Home > Door Latches
Shopping cart is empty.
This catalog has no sub-catalogs.
  • Door Latches


    Door Latch Reconditioning

    If I have the same model in stock then you send me yours and I send you a reconditioned one. If I do not have one in stock or the standard connections have either been altered or removed you send me yours and I recondition it.

    If yours cannot be reconditioned then a new one would be required.

    Cost for a new RHD driver's door latch-$500.00

    Returns are by express post and are included in the price.

    There is/was someone in the UK that is/was reconditioning door latches; the reconditioned door latches were dispatched with the proviso that the failed door latches were to be returned for reconditioning. In quite a number of cases the failed door latches were not returned - therefore that door latch reconditioning business now has problems supplying reconditioned door latches with the above proviso. I do not intend to go down the same track.

    P38 Door Latch Reconditioning

    Right Hand Front (Drivers) Door latches for RHD P38s shown
    Left Hand Front (Passengers) Door latches are mirror images
    LHD latches look similar but have different innards.

    Note: not all makes and models of vehicles have all of the above computers/functions/features.

    ALR6952 RH
    ALR6953 LH
    From beginning
    To VA351307

    This latch is the first style with both the 6-way and 1-way connector moulded into the housing.

    ASR2458 RH
    ASR2459 LH
    FQJ102780 RH
    FQJ102790 LH
    FQJ103220 RH
    FQJ103230 LH

    From VA351308 To XA428521

    This latch is the middle style with the 6-way and 1-way connector at the end of a short wiring loom.

    FQJ103260 RH
    FQJ103270 LH

    From XA428522
    To Runout

    This latch is the final style with an 8-way connector at the end of a short wiring loom (only 7 pins are used)

    As you can see from the above photos there are three different models of latches and the changeover VINs for each. Please remove the door trim, peal back the protective sheet, and physically check the latch and connectors as some may have been replaced previously and the connectors modified or eliminated (wires soldered together etc).

    If the connectors have been changed or the wires soldered please remove the failed door latch and send it to me for reconditioning, as no exchange is possible.

    I have a very limited stock of Right Hand Drive door latches, and no Left Hand Drive door latches. So in order to prevent this (above) same thing from happening to me I will be asking you to remove and send me your failed door latch. RHD latches - Upon receipt I will test and assess your latch and if deemed repairable I will dispatch a reconditioned latch to you. LHD latches - Will have to be reconditioned and returned - hopefully I will eventually get a supply of failed LHD latches and once reconditioned be able to supply them on a similar exchange system.

    Door cannot be opened (Latch jammed) - First way to try is to thump the outside of the door edge (where the door metal is thickest and at the height where the latch is located behind) with a rubber mallet covered in several layers of cloth while simultaneously unlocking (by turning the key or pressing the unlock button on the remote). The other is to forcibly open a front door by smashing into the top of the door latch, removing the spring and manually operating the latching arm. (Instructions - click on link above) After you have opened the door please remove and send me the damaged door latch and spring etc, as I would like to see if I could resurrect it back into a working condition for you.

    Failures: Most of the door latches fail due to their microswitches becoming intermittent. A few have lock/unlock motor failures. This can be observed with the doors locking and unlocking without command, another problem is the EKA code cannot be input, also a 'door open' is registered when the door is closed.

    Reconditioning: All microswitches are replaced depending on which latch(s) have failed - three in the driver's door, two in the passengers door and one each in the rear doors.

    Lock/unlock motors are inspected and tested - if worn or not working - they will be replaced.

    Super lock motors are not tested or inspected, as I discourage their use. I have had several fail and a failure in the super lock position means the door latch has to be smashed to be able to open the door.

    Remove door trim

      

      

    Remove Latch

      

      

    Door latch will not release